Aluminium Mast Adapter for Starlink Gen 2

Specifications

Aluminium mast adaptor for Starlink Gen 2 rectangle terminals

This cast aluminium mast adaptor lets you fit a Starlink Gen 2 rectangle terminal to a compatible existing mast, roof mount or round pipe.

Use it when you need a simple adaptor for a suitable 30–50 mm outside-diameter pipe or mast, and you do not need the heavier machined billet version.

✅ Choose this if

• You have a Starlink Gen 2 rectangle terminal.
• You want to reuse a compatible existing mast, roof mount or round pipe.
• Your pipe or mast is between 30 mm and 50 mm outside diameter.
• You want the cast aluminium adaptor option rather than the heavy duty machined billet adaptor.

Compatibility and fitment

• Starlink terminal: Starlink Gen 2 rectangle terminal only.
• Mast / pipe fitment: compatible round pipe or mast from 30 mm to 50 mm outside diameter.
• Recommended pipe size: for best stability, Spacetek recommends using 40–50 mm pipe where possible.
• Not for: Starlink Mini, Starlink Standard (Gen 3 / V4) or other Starlink terminal families.

Key features

• Cast aluminium construction: a practical adaptor body for standard Gen 2 mounting situations.
• 30–50 mm mast range: suits a range of compatible round pipes and existing mount setups.
• Simple Gen 2 adaptor fit: helps connect the rectangle Gen 2 terminal to a suitable mast without replacing the whole mount setup.
• Included grub screws: supplied grub screws help secure the adaptor during installation.
• Clear option choice: choose this cast adaptor for standard use, or choose the heavy duty machined billet version if you want the stronger Australian-made version.

📦 What's included

• 1 x cast aluminium mast adaptor for Starlink Gen 2.
• Included grub screws for securing the adaptor. 

Not included: Starlink terminal, mast, round pipe, roof mount or installation tools.

🛠️ Installation overview

1. Confirm your Starlink is the Gen 2 rectangle terminal.
2. Measure the outside diameter of the pipe or mast you plan to use.
3. Place the adaptor onto a compatible 30–50 mm round pipe or mast.
4. Fit the Gen 2 terminal into the adaptor and secure the grub screws evenly.
5. Do not over-tighten the grub screws. Check that the terminal and mast are stable before final use.

Installation suitability depends on the mast, roof mount or pipe you are adapting to. Confirm the full mount setup is structurally suitable for your site before ordering.

📏 Specifications and fitment notes

• Product type: mast adaptor / pole adaptor.
• Compatible Starlink model: Starlink Gen 2 rectangle terminal.
• Material: cast aluminium.
• Pipe / mast outside diameter: 30–50 mm.
• Recommended pipe outside diameter: 40–50 mm where possible for best stability.
• Product dimensions: 100 mm x 120 mm x 135 mm.
• Inventory item weight: 0.24 kg.
• Fit note: this cast version has a looser fit than the heavy duty machined version.

⚠️ Important notes

• For Starlink Gen 2 rectangle terminals only.
• Confirm your mast diameter before ordering.
• This adaptor does not make an unsuitable mast, pipe or roof mount suitable. The supporting structure must be appropriate for the installation conditions.
• Do not over-tighten the grub screws.
• This product is not endorsed by or affiliated with Starlink or SpaceX.

🇦🇺 Spacetek support

• Spacetek specialises in Starlink accessories for Australian and New Zealand installations.
• If you are unsure whether this adaptor suits your Starlink model or mast size, contact Spacetek before ordering.
• Local support is available for compatibility questions and mount selection.