Boat Rod Holder Pole Mount Adapter for Starlink - 316 Marine Grade

Specifications

🛰️ Turn a compatible rod holder into a Starlink pole-mount base

Build your rod-holder mounting setup around a 316 marine-grade stainless steel mast. This rod holder pole mount adapter provides the interface for a compatible receiving pole or pole adaptor, with cable routing through the centre of the mast and out beneath the rod holder to keep the cable path tidy.

Fitment comes first: your receiving pole or pole adaptor must have a minimum internal diameter of 50 mm. Compatibility depends on that receiving component, not simply on which Starlink terminal you own.

✅ Choose this if

• You need a stainless steel mast with a rod holder fitting, rather than a complete Starlink mounting kit.
• You already have, or plan to add, a compatible receiving pole or pole adaptor.
• You want to route the cable through the mast instead of leaving the whole cable run outside it.

📏 Compatibility and fitment

• Receiving pole or pole adaptor: minimum 50 mm internal diameter. Measure yours before ordering.
• Starlink Mini: can be paired with the separately sold Spacetek 3-in-1 Starlink Mini pole adaptor and kickstand.
• Other Starlink terminals or devices: suitability depends on the receiving pole or pole adaptor used. This mast is not a direct-fit adaptor and required a compatible pole adaptor for your Starlink Dish.

Key features

• 316 stainless steel: marine-grade construction for outdoor and marine-adjacent installations.
• Through-mast cable routing: run the cable through the centre and out beneath the rod holder towards your power supply.
• Compact adapter format: a mast interface for setups that do not require a full pole or bracket assembly.

📦 What's included

1 × stainless steel pole mast with rod holder fitting.

Not included: Starlink pole adaptor, Starlink terminal, router, cables or other mounting hardware. This listing is for the standalone mast, not a bundle.

🛠️ Installation overview

Check the receiving pole or pole adaptor diameter and confirm the complete mounting arrangement is compatible before assembly. Where suitable for your installation, route the cable through the mast and out beneath the rod holder towards the power supply.

⚠️ Important notes

The 50 mm measurement applies to the receiving pole or pole adaptor; it is not a stated boat rod-holder socket size. Match this mast to a compatible receiver before use. If you are unsure which parts you need, contact Spacetek with your pole or adaptor measurements and Starlink model before ordering.